Topic: Characteristics of Hafnium

[chenhongxia]

Hafnium is a shiny silvery, ductile metal that is corrosion resistant and chemically similar to zirconium. The physical properties of hafnium are markedly affected by zirconium impurities, and these two elements are among the most difficult ones to separate. A notable physical difference between them is their density (zirconium being about half as dense as hafnium), but chemically the elements are extremely similar.
The most notable physical property of hafnium is that it has a very high neutron-capture cross-section, and nuclei of several hafnium isotopes can each absorb multiple neutrons. This makes hafnium a good material for use in the control rods for nuclear reactors. Its neutron-capture cross-section is about 600 times that of zirconium's. (Other elements that are good neutron-absorbers for control rods are cadmium and boron.)
Separation of hafnium and zirconium becomes very important in the nuclear power industry, since zirconium is a good fuel-rod cladding metal, with the desirable properties of a very low neutron capture cross-section and good chemical stability at high temperatures. However, because of hafnium's neutron-absorbing properties, hafnium impurities in zirconium would cause it to be far less useful for nuclear reactor applications. Thus a nearly complete separation of zirconium and hafnium is necessary for their use in nuclear power.
Hafnium carbide is the most refractory binary compound known, with a melting point over 3890 ?C, and hafnium nitride is the most refractory of all known metal nitrides, with a melting point of 3310 ?C. This has led to proposals that hafnium or its carbides might be useful as construction materials that are subjected to very high temperatures.
The metal is resistant to concentrated alkalis, but halogens react with it to form hafnium tetrahalides. At higher temperatures hafnium reacts with oxygen, nitrogen, carbon, boron, sulfur, and silicon.
The nuclear isomer Hf-178-m2 is also a source of cascades of gamma rays whose energies total 2.45 MeV per decay. It is notable because it has the highest excitation energy of any comparably long-lived isomer of any element. One gram of pure Hf-178-m2 would contain approximately 1330 megajoules of energy, the equivalent of exploding about 317 kilograms (700 pounds) of TNT. Possible applications requiring such highly concentrated energy storage are of interest. For example, it has been studied as a possible power source for gamma ray lasers